Elsinore

Elsinore

Monotype

Monotype - Black

$275 (Available Early April) Suggested Retail USD

It appears someone snuck into the lab and created a helmet that’s part modular, part motocross. The Elsinore Monotype Helmet has an under-the-radar color scheme, but that just makes the unique lines of the design stand out that much more. This helmet arrives with a Fog-Free DarkSmoke MXShield™ installed, and the whole front lifts for modular functionality. The shell is handmade from a lightweight composite fiberglass.

Buy local Buy online
Colors
Sizes
XS
S
M
L
XL
2XL
3XL
    American Standard
  • Meets DOT FMVSS 218 (US) Helmet Safety Standards

  • Shield
  • Includes Limo Black Fog-Free MXShield™

  • Liner
  • Premium comfort liner with Moisture-Wicking Hydradry™ and Ax®Suede for a custom fit

  • Shell
  • Precision handcrafted FRP shell construction for optimum strength with minimized weight

Fit

Round
Intermediate Oval
Long Oval
The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

Venting

Good
Better
Best
8 air intakes and 2 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. When you really star feeling the heat, the modular facemask allows for environment-dependent configurations

Weight

Lightest
Light
Average
Precision handcrafted FRP shell construction for optimum strength with minimized weight

Choosing the correct helmet size

Helmet fit is critical to helmet protective performance. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.

Head measurement instructions

Wrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size.

Helmet sizing information

To achieve proper helmet fitment, begin by finding your head circumference size using the method described below. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheekpads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheekpads can be purchased to obtain the best fit. Ask your dealer or visit www.rideicon.com for more information.

When sizing your helmet please refer to the size charts that are unique to each helmet shell:

Airframe Pro Helmet Sizing Chart
  • Shell
  • 2XS
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • 2XS 6 3/8 - 6 1/2
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • 2XS 20 1/8 - 20 1/2
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • 2XS 51-52
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Variant Pro Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Airflite Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Airform Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Airmada Helmet Sizing Chart
  • Shell
  • 2XS
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • 2XS 6 3/8 - 6 1/2
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • 2XS 20 1/8 - 20 1/2
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • 2XS 51-52
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66

Care Instructions

Let’s face it, Icon® helmets look cool and you want to keep them that way. We’ve found the following methods work really well to keep our helmets looking sharp and ready to roll. Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; it’s like using brake cleaner to polish your plastics—don’t do it!

Interior Cleaning
1. Remove interior lining as shown on page 10 of the User Manual. 2. Soak your interior in a mild solution of baby shampoo. 3. Rinse in clean water several times until all soap is gone. 4. Let interior air dry and replace accordingly. * Never machine wash or dry your helmet interior.

Shield Cleaning
Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage
It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight.

Exterior Cleaning (Gloss Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. (Don't skip this step!) 2. Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts. 3. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots. * Never machine wash or dry your helmet interior.

Exterior Cleaning (Rubatone Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. 2.Remove the now softened bugs and road grime with a light blotting action. For this use the soft part of your helmet bag provided or a clean microfiber cloth. * Never rub aggressively with anything on the Rubatone™ or you can ruin the finish.

Maintenance
1. For gloss helmet finishes, use spray automotive wax that is specifically designed for cars with a clear coat. (Available at any automotive store.) 2. For matte finishes, you know better than to polish a matte finish don’t you?

Advisory
One Impact Rule - Any helmet that has sustained an impact should be replaced. Helmets are designed to absorb only one impact. The helmet is designed to absorb some shock by partial destruction of the shell and liner. After your helmet has endured any impact, the impact absorption liner portion of your helmet will have dispersed the energy from that impact, thus rendering the liner compacted and, therefore, compromised. This damage may not be visible. Even if there is no VISIBLE damage to the shell, the helmet’s usefulness is expired after one impact. A helmet that has experienced an impact should be destroyed and replaced, even if it is apparently undamaged. Obsolesence and Helmet Disposal - A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear, e.g. change of fit, cracks, rust, fraying or other signs of normal “wear and tear” that can contribute to helmet degradation.

Replacement Parts

    Product Manual

    Monotype
    • Color
    • XS
    • S
    • M
    • L
    • XL
    • 2XL
    • 3XL
    • Black
    • XS 0104-3299
    • S 0104-3300
    • M 0104-3302
    • L 0104-3303
    • XL 0104-3304
    • 2XL 0104-3305
    • 3XL 0104-3306
    • White
    • XS 0104-3308
    • S 0104-3309
    • M 0104-3310
    • L 0104-3311
    • XL 0104-3312
    • 2XL 0104-3313
    • 3XL 0104-3314
    • Red
    • XS 0104-3315
    • S 0104-3316
    • M 0104-3317
    • L 0104-3318
    • XL 0104-3319
    • 2XL 0104-3320
    • 3XL 0104-3321
    • Grey
    • XS 0104-3322
    • S 0104-3323
    • M 0104-3324
    • L 0104-3325
    • XL 0104-3328
    • 2XL 0104-3329
    • 3XL 0104-3330
    Elsinore

    Monotype

    part modular, part motocross

    Exterior

    The Elsinore™ helmet is a motorized tribute to our youthful BMX days of quarterpipes and bunnyhops. Equipped with a removable modular face mask, riders can now adapt to ever-changing environments while keeping up a barrier against wind and debris. It features a lightweight, handcrafted composite shell construction the modern rider requires.

    Shield

    The quick-change Fog-Free MXShield™ is integrated with the modular face mask. It provides maximum visibility with zero distortion in all weather conditions, while the non-lift integrated visor reduces glare.

    Interior

    The Elsinore features a premium Ax®Suede comfort liner with Moisture-Wicking Hydradry™ that provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective energy-absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build-up. Combine the superior venting with the modular face mask, and you're left with our most versatile shell yet.

    HelmLink

    Bluetooth Communicator (Sold Separately)

    The Elsinore features an all new approach to connectivity with fellow riders. ICON worked together with SENA Communications to develop a bluetooth communicator system that seamlessly replaces the side plates and rear neckroll of the Elsinore for a fully integrated system. Industry leading mesh technology and Bluetooth 5 capabilities allow you to connect with up to 20 riders. Housed inside the rear control unit lies an extra long battery life for those cross-country rides as well as an integrated rear-facing adaptive flashing light for heightened visibility.

    Complete the Look

    Head to Toe, We've got you covered

    We take the hit so you don't have to. Whether you're carving the canyon roads or headed for a night out, we've got the gear to keep you covered and looking fly.

    Low, Down, & Shifty

    1978 YAMAHA XS650
    Explore The Bike

    Hippie Dippy

    Featured Video
    Watch The Video