Airframe Pro

Top Shelf

Top Shelf

Top Shelf - Red

$390 Suggested Retail USD

With blades of steel and faces of fiberglass, this is old-time hockey at its finest. Built on a lightweight fiberglass FRP shell, the Topshelf includes a Fog-Free Clear & Dark Smoke Optics shield. The customizable 5-piece Hydradry comfort liner allows you to dial in your fit. The AFP's extensive venting system produces the industry's most ventilated helmet to date.

Buy local Buy online
Colors
Sizes
XS
S
M
L
XL
2XL
3XL
    World Standard
  • Meets DOT FMVSS 218 (US), ECE 22-06 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

  • Shield
  • Includes Clear and Dark Smoke Fog-Free Icon Optics™ shields

  • Liner
  • Five-piece modular liner with Moisture-Wicking Hydradry™ liner.

  • Shell
  • Handmade composite fiberglass FRP shell for strength with minimal weight

Fit

Round
Intermediate Oval
Long Oval
The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

Venting

Good
Better
Best
9 air intakes and 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting.

Weight

Lightest
Light
Average
Precision assembly techniques help us to dramatically reduce the shell profile and allow us to craft a helmet that is exceptionally light.

Choosing the correct helmet size

Helmet fit is critical to helmet protective performance. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.

Head measurement instructions

Wrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size.

Helmet sizing information

To achieve proper helmet fitment, begin by finding your head circumference size using the method described below. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheekpads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheekpads can be purchased to obtain the best fit. Ask your dealer or visit www.rideicon.com for more information.

When sizing your helmet please refer to the size charts that are unique to each helmet shell:

Elsinore Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Inches
  • XS 21 1/4 - 21 5/8
  • S 21 5/8 - 22
  • M 22 1/2 - 22 7/8
  • L 22 7/8 - 23 1/4
  • XL 23 5/8 - 24
  • 2XL 24 3/8 - 24 3/4
  • 3XL 25 1/4 - 25 5/8
  • Centimeters
  • XS 54-55
  • S 55-56
  • M 57-58
  • L 58-59
  • XL 60-61
  • 2XL 62-63
  • 3XL 64-65
Domain Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Airframe Pro Helmet Sizing Chart
  • Shell
  • 2XS
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • 2XS 6 3/8 - 6 1/2
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • 2XS 20 1/8 - 20 1/2
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • 2XS 51-52
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Variant Pro Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Airflite Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66
Airform Helmet Sizing Chart
  • Shell
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66

Care Instructions

Let’s face it, Icon® helmets look cool and you want to keep them that way. We’ve found the following methods work really well to keep our helmets looking sharp and ready to roll. Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; it’s like using brake cleaner to polish your plastics—don’t do it!

Interior Cleaning
1. Remove interior lining as shown on page 10 of the User Manual. 2. Soak your interior in a mild solution of baby shampoo. 3. Rinse in clean water several times until all soap is gone. 4. Let interior air dry and replace accordingly. * Never machine wash or dry your helmet interior.

Shield Cleaning
Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage
It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight.

Exterior Cleaning (Gloss Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. (Don't skip this step!) 2. Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts. 3. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots. * Never machine wash or dry your helmet interior.

Exterior Cleaning (Rubatone Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. 2.Remove the now softened bugs and road grime with a light blotting action. For this use the soft part of your helmet bag provided or a clean microfiber cloth. * Never rub aggressively with anything on the Rubatone™ or you can ruin the finish.

Maintenance
1. For gloss helmet finishes, use spray automotive wax that is specifically designed for cars with a clear coat. (Available at any automotive store.) 2. For matte finishes, you know better than to polish a matte finish don’t you?

Advisory
One Impact Rule - Any helmet that has sustained an impact should be replaced. Helmets are designed to absorb only one impact. The helmet is designed to absorb some shock by partial destruction of the shell and liner. After your helmet has endured any impact, the impact absorption liner portion of your helmet will have dispersed the energy from that impact, thus rendering the liner compacted and, therefore, compromised. This damage may not be visible. Even if there is no VISIBLE damage to the shell, the helmet’s usefulness is expired after one impact. A helmet that has experienced an impact should be destroyed and replaced, even if it is apparently undamaged. Obsolesence and Helmet Disposal - A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear, e.g. change of fit, cracks, rust, fraying or other signs of normal “wear and tear” that can contribute to helmet degradation.

Airframe Pro Comfort Liner Sets
  • Part Number
  • Color
  • Size
  • Price
  • 0134-1839
  • Color HydraDry™
  • Size XXS Tighter
  • Price $45
  • 0134-1840
  • Color HydraDry™
  • Size XXS Normal
  • Price $45
  • 0134-1841
  • Color HydraDry™
  • Size XXS Looser
  • Price $45
  • 0134-1842
  • Color HydraDry™
  • Size XS Tighter
  • Price $45
  • 0134-1843
  • Color HydraDry™
  • Size XS Normal
  • Price $45
  • 0134-1844
  • Color HydraDry™
  • Size XS Looser
  • Price $45
  • 0134-1843
  • Color HydraDry™
  • Size S Tighter
  • Price $45
  • 0134-1844
  • Color HydraDry™
  • Size S Normal
  • Price $45
  • 0134-1845
  • Color HydraDry™
  • Size S Looser
  • Price $45
  • 0134-1846
  • Color HydraDry™
  • Size M Tighter
  • Price $45
  • 0134-1847
  • Color HydraDry™
  • Size M Normal
  • Price $45
  • 0134-1848
  • Color HydraDry™
  • Size M Looser
  • Price $45
  • 0134-1849
  • Color HydraDry™
  • Size L Tighter
  • Price $45
  • 0134-1850
  • Color HydraDry™
  • Size L Normal
  • Price $45
  • 0134-1851
  • Color HydraDry™
  • Size L Looser
  • Price $45
  • 0134-1894
  • Color HydraDry™
  • Size XL Tighter
  • Price $45
  • 0134-1852
  • Color HydraDry™
  • Size XL Normal
  • Price $45
  • 0134-1853
  • Color HydraDry™
  • Size XL Looser
  • Price $45
  • 0134-1852
  • Color HydraDry™
  • Size 2XL Tighter
  • Price $45
  • 0134-1853
  • Color HydraDry™
  • Size 2XL Normal
  • Price $45
  • 0134-1854
  • Color HydraDry™
  • Size 2XL Looser
  • Price $45
  • 0134-1853
  • Color HydraDry™
  • Size 3XL Tighter
  • Price $45
  • 0134-1854
  • Color HydraDry™
  • Size 3XL Normal
  • Price $45
Airframe Pro Sideplates
  • Part Number
  • Color
  • Size
  • Price
  • 0133-0672
  • Color Gloss Black
  • Size One Size
  • Price $15
  • 0133-0676
  • Color Gloss White
  • Size One Size
  • Price $15
  • 0133-0677
  • Color Rubatone Black
  • Size One Size
  • Price $25
  • 0133-0928
  • Color Brozak
  • Size One Size
  • Price $25
  • 0133-0931
  • Color Deployed Camo
  • Size One Size
  • Price $25
  • 0133-0935
  • Color Cottonmouth Gold
  • Size One Size
  • Price $25
  • 0133-1003
  • Color Barong
  • Size One Size
  • Price $25
  • 0133-1005
  • Color Max Flash
  • Size One Size
  • Price $25
  • 0133-1016
  • Color Warbird Blue
  • Size One Size
  • Price $25
  • 0133-1017
  • Color Warbird Black
  • Size One Size
  • Price $25
  • 0133-1079
  • Color Harbinger Black
  • Size One Size
  • Price $25
  • 0133-1221
  • Color LuckyLid3 Gold
  • Size One Size
  • Price $25
  • 0133-1250
  • Color FastFood
  • Size One Size
  • Price $25
Airframe Pro Top Vent Switch
  • Part Number
  • Color
  • Size
  • Price
  • 0133-0880
  • Color Black X2
  • Size One Size
  • Price $8
Airframe Pro Chin Curtain
  • Part Number
  • Color
  • Size
  • Price
  • 0134-1855
  • Color Black
  • Size One Size
  • Price $8
Airframe Pro Chin Vent Switch
  • Part Number
  • Color
  • Size
  • Price
  • 0133-0878
  • Color Black
  • Size One Size
  • Price $10
Airframe Pro Breath Deflector
  • Part Number
  • Color
  • Size
  • Price
  • 0134-1393
  • Color Black
  • Size One Size
  • Price $5
  • 0134-1394
  • Color White
  • Size One Size
  • Price $5
Airframe Pro Forehead Vent Switch
  • Part Number
  • Color
  • Size
  • Price
  • 0133-0879
  • Color Black
  • Size One Size
  • Price $6
Icon Optics Shield
  • Color
  • Part Number
  • Size
  • Price
  • Clear
  • Part Number 0130-1155
  • Size ECE 22.06
  • Price $40
  • Clear
  • Part Number 0130-0476
  • Size ECE 22.05
  • Price $40
  • Light Smoke
  • Part Number N/A-N/A
  • Size ECE 22.06
  • Price $40
  • Light Smoke
  • Part Number 0130-0477
  • Size ECE 22.05
  • Price $40
  • Dark Smoke
  • Part Number 0130-1155
  • Size ECE 22.06
  • Price $40
  • Dark Smoke
  • Part Number 0130-0478
  • Size ECE 22.05
  • Price $40
  • Yellow
  • Part Number 0130-1156
  • Size ECE 22.06
  • Price $40
  • Yellow
  • Part Number 0130-0500
  • Size ECE 22.05
  • Price $40
  • RST Silver
  • Part Number 0130-1157
  • Size ECE 22.06
  • Price $45
  • RST Silver
  • Part Number 0130-0482
  • Size ECE 22.05
  • Price $45
  • RST Gold
  • Part Number N/A-N/A
  • Size ECE 22.06
  • Price $45
  • RST Gold
  • Part Number 0130-0481
  • Size ECE 22.05
  • Price $45
  • RST Bronze
  • Part Number 0130-1158
  • Size ECE 22.06
  • Price $45
  • RST Bronze
  • Part Number 0130-1002
  • Size ECE 22.05
  • Price $45
  • RST Sunset
  • Part Number 0130-1159
  • Size ECE 22.06
  • Price $45
  • RST Sunset
  • Part Number N/A-N/A
  • Size ECE 22.05
  • Price $45
  • RST Red
  • Part Number N/A-N/A
  • Size ECE 22.06
  • Price $45
  • RST Red
  • Part Number 0130-0640
  • Size ECE 22.05
  • Price $45
  • RST Blue
  • Part Number 0130-1160
  • Size ECE 22.06
  • Price $45
  • RST Blue
  • Part Number 0130-0479
  • Size ECE 22.05
  • Price $45
  • RST Green
  • Part Number 0130-1161
  • Size ECE 22.06
  • Price $45
  • RST Green
  • Part Number 0130-0480
  • Size ECE 22.05
  • Price $45
  • RST Purple
  • Part Number 0130-1162
  • Size ECE 22.06
  • Price $45
  • RST Purple
  • Part Number 0130-0648
  • Size ECE 22.05
  • Price $45
  • RST Chameleon
  • Part Number N/A-N/A
  • Size ECE 22.06
  • Price $60
  • RST Chameleon
  • Part Number 0130-0483
  • Size ECE 22.05
  • Price $60
PinLock® Ready Icon Optics Shield
  • Color
  • Part Number
  • Size
  • Price
  • Clear
  • Part Number 0130-0697
  • Size One Size
  • Price
  • Dark Smoke
  • Part Number 0130-0698
  • Size One Size
  • Price
  • RST Silver
  • Part Number 0130-0699
  • Size One Size
  • Price $45
PinLock® Icon Optics Insert Lens
  • Color
  • Part Number
  • Size
  • Price
  • Clear
  • Part Number 0130-0700
  • Size One Size
  • Price
  • Dark Smoke
  • Part Number 0130-0701
  • Size One Size
  • Price
  • ProtecTint™
  • Part Number 0130-0702
  • Size One Size
  • Price $95
Icon Tracshield
  • Color
  • Part Number
  • Size
  • Price
  • Dark Smoke
  • Part Number 0130-0623
  • Size One Size
  • Price $45
  • Clear
  • Part Number 0130-0622
  • Size One Size
  • Price $45
  • Yellow
  • Part Number 0130-0624
  • Size One Size
  • Price $45
  • RST Silver
  • Part Number 0130-0625
  • Size One Size
  • Price $45
  • RST Gold
  • Part Number 0130-0946
  • Size One Size
  • Price $50
  • RST Bronze
  • Part Number 0130-1003
  • Size One Size
  • Price $50
  • RST Red
  • Part Number 0130-1010
  • Size One Size
  • Price $50
Airframe Pro Pivot Kit
  • Color
  • Part Number
  • Size
  • Price
  • Black
  • Part Number 0133-0671
  • Size One Size
  • Price $10
  • White
  • Part Number 0133-0670
  • Size One Size
  • Price $10
Top Shelf
  • Color
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Red
  • XS 0101-15071
  • S 0101-15072
  • M 0101-15073
  • L 0101-15074
  • XL 0101-15075
  • 2XL 0101-15076
  • 3XL 0101-15077

old-time hockey at its finest

Exterior

Airframe Pro Helmet

A decrease of both drag and weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes and five exhaust vents, ventilation is a premier feature on the Airframe Pro. The forehead vents are angled to provide linear air intake at speed while deep channels in the liner enhance airflow by routing more air effectively.

Shield

Airframe Pro Helmet

The Rapid release shield removal system allows you to swap the fog-free Icon Optics™ shield in the blink of an eye. This cutting-edge system allows you to select the right shield for the conditions, all of which produce an unrivaled distortion-free line of sight for what lies ahead. The flat Icon TracShield™ is available for the Airframe Pro as a factory solution for riders who require tear-offs. Compatible with our Rapid Release™ shield change mechanism, the TracShield™ can be used on the Airframe Pro, Airform, and Airmada helmets.

Interior

Airframe Pro Helmet

The five-piece sweat-wicking Hydradry™ liner provides a greater amount of fitment combinations for each unique head shape. Crown, lateral, fore, and aft padding components allow for a possibility of 27 combinations in a single shell; double that of the Airframe Pro's competitors.

ICON TracShield™

Compatible with the Airframe Pro Helmet

The flat Icon TracShield™ is available for the Airframe Pro as a factory solution for riders who require tear-offs. Compatible with our Rapid Release™ shield change mechanism, the TracShield™ can be used on the Airframe Pro™, Airform™, and Airmada™ helmets, and is available in Dark Smoke, Clear, Yellow, RST Silver, and RST Bronze. Tear-offs are sold separately.

Complete The Look

Head to Toe, We've got you covered

We take the hit so you don't have to. Whether you're carving the canyon roads or headed for a night out, we've got the gear to keep you covered and looking fly.

Gixxer Johnny

1993 Suzuki GSXR 1100 WP
Explore The Bike

Hippie Dippy

Featured Video
Watch The Video