Men's

Stormhawk WP

Stormhawk WP

Stormhawk WP - Tan

$315 Suggested Retail USD

The Stormhawk™ motorcycle jacket is our latest foray into the weatherproof riding category. The low-key exterior is a durable 4-way stretch textile, backed with a waterproof/breathable Hycor membrane - perfect for three-season riding. Internally the jacket is reinforced with 600d polyester fabric for improved abrasion resistance. The Stormhawk™ comes standard with D3O® CE-Certified LP1 shoulder and elbow impact protectors. The LP1 protectors are more breathable and flexible than previous generations of impact protectors, improving the jacket's overall comfort. The jacket also includes a D3O® Viper back impact protector and full-length insulated liner for colder weather riding. Should your ride include more temperate locations, the large exterior front & back vents, sealed with YKK® Aquagard™ zippers, provide significant airflow. The Stormhawk™ Jacket can be worn individually or zipped directly to the Stormhawk™ Pant.

Buy local Buy online
Colors
Sizes
S
M
L
XL
2XL
3XL
    Fit
  • ICON® Relaxed Fit

  • Material
  • Hycor Membrane Waterproof/Breathable Chassis

  • Protection
  • Jacket Tested and Certified According to FprEN 17092-4:2018 Class A

    D30® LP1 Removable Shoulder, Elbow, and Back Impact Protectors - EN 1621-2:2014 / EN 1621-1:2012, Level 1, T-, T+

  • Features
  • Full Length Removable Liner, YKK® Matte Finish Waterproof Zippers, Front and Back Zipper Vents, Jacket/Pant Interlock System

Fit

Relaxed
Sport
Attack
Our relaxed fit jackets are designed with a loose and longer fit so that it can be worn by those with a full frame and over another garment.

Waterproofing

Good
Better
Best
Our Waterproofing Level 3 will get you through heavy rain, wet snow, and some pressure.

Conditions

Cold
Mild
Hot
Superior materials and a removable insulated liner minimizes bulk while retaining range of motion and adaptability to the weather, keeping you comfortable on mild to colder riding days.

Jacket Sizing Information

There are three variables to consider when sizing an ICON jacket. The first two are the chest and sleeve measurements, which are what your jacket size is based on. The third is the the jacket fit type, which defines the “cut” of the jacket (Attack, Sport, or Relaxed). Instructions, sizing charts and jacket fit details can be found below. The fit type of every Icon jacket can be found in the first bullet point of the copy block for that individual product.

  • Attack
  • Sport
  • Relaxed
  • Chest
  • Attack Tailored Body
  • Sport Straight Body
  • Relaxed Straight Body
  • Sleeves
  • Attack Precurved Arms
  • Sport Semi-Precurved
  • Relaxed Straight Arms

Chest measurement instructions

While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.

Sleeve measurement instructions

While standing with your arms relaxed at your side, place one end of a flexible tape measure on your spine at the base of your neck. Measure over the top of your shoulder, down over the point of your elbow, and finish at the wrist bone.

Mens Jacket Sizing Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • Chest Inches
  • XS 34"-36"
  • S 36-38
  • M 38-40
  • L 40-42
  • XL 42-44
  • 2XL 46-48
  • 3XL 48-50
  • 4XL 52-54
  • 5XL 54-56
  • Sleeve Inches
  • XS 30
  • S 31
  • M 32
  • L 33
  • XL 34
  • 2XL 35
  • 3XL 36
  • 4XL 37
  • 5XL 38
Mens Jacket Conversion Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • United Kingdom
  • XS 36
  • S 38
  • M 40
  • L 42/44
  • XL 44/46
  • 2XL 48
  • 3XL 50
  • 4XL 54
  • 5XL 56
  • Europe
  • XS 46
  • S 48
  • M 50
  • L 54
  • XL 56
  • 2XL 58
  • 3XL 60
  • 4XL 64
  • 5XL 66

Care Instructions

General Care
ICON® jackets are tough and designed to withstand a great deal of asphalt induced abuse, but no jacket can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your Icon jacket thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the jacket. Most Icon textile jackets use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the jacket could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your jacket. Always store your jacket in a dark, well ventilated area. Jackets are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your jacket (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.

Pre-Cleaning
It is important to follow a few simple steps to prepare your jacket for washing. Remove the insulated liner from the jacket (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the jacket. Make sure to close and fasten all the pocket flaps.

Cleaning
Insulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth. Jacket (Textile Areas) - Hand wash the jacket with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle toothbrush works well in helping to remove any bug strikes or road debris. Rinse the jacket with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the jacket!

Drying
Insulated Liner - The insulated liner should be allowed to drip dry-only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process. Jacket - DO NOT use a machine dryer. Subjecting the jacket to a machine dryer will damage the jacket and possibly the dryer itself. The only recommended method for drying the jacket is drip-drying. Do not subject the jacket to direct sunlight, hair dryers or any type of heater during the drying process. DO NOT use an iron on any part of the garment.

D3O® Viper 2 Back
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2702-0197
  • Size S
  • Price $45
  • Mens
  • Part Number 2702-0196
  • Size M
  • Price $45
  • Mens
  • Part Number 2702-0202
  • Size L
  • Price $45
D3O® Viper 1 Back
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2706-0162
  • Size S
  • Price $30
  • Mens
  • Part Number 2706-0163
  • Size M
  • Price $30
  • Mens
  • Part Number 2702-0230
  • Size L
  • Price $30
D3O® LP1 Shoulder
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0210
  • Size One Size
  • Price
D3O® LP1 Elbow
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0209
  • Size One Size
  • Price
D3O® LP2 Shoulder
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0212
  • Size One Size
  • Price
D3O® LP2 Elbow
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0211
  • Size One Size
  • Price

Product Manual

Stormhawk WP
  • Color
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Black
  • S 2820-5347
  • M 2820-5348
  • L 2820-5349
  • XL 2820-5350
  • 2XL 2820-5351
  • 3XL 2820-5352
  • Tan
  • S 2820-5359
  • M 2820-5360
  • L 2820-5361
  • XL 2820-5362
  • 2XL 2820-5363
  • 3XL 2820-5364

Perfect for three-season riding

Waterproofing

Level 3

The HYCOR waterproof/breathable chassis is Dupont Teflon® coated with all seams sealed. In addition the front zipper utilizes YKK’s AquaGuard® technology as well as a full length gusset to keep the elements at bay.

Reflective Hits

Be Seen, but still look awesome

Retro-reflective hits ensure visibility in low light conditions, and are a must for urban commuting.

D3O® LP1 Impact Protector Package

Shoulders, Elbows, & Back

Includes a full suite of industry-leading D3O® LP1 Impact Protectors (shoulders, elbows, and back). The D3O® LP1 utilizes the latest material innovation from D3O® which offers increased durability while offering great impact protection whilst remaining low profile and lightweight. The new highly vented geometry offers a 45% improvement in breathability.