Domain
Gravitas
Gravitas
Meets DOT FMVSS 218 (US), ECE 22-06 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.
Includes Clear and RST Silver Fog-Free Domain™ shields
Removable Moisture-Wicking Hydradry™ Red comfort liner for a custom fit
Handmade composite fiberglass FRP shell for strength with minimal weight
Choosing the correct helmet size
Helmet fit is critical to helmet protective performance. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.
Head measurement instructions
Wrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size.
Helmet sizing information
To achieve proper helmet fitment, begin by finding your head circumference size using the method described below. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheekpads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheekpads can be purchased to obtain the best fit. Ask your dealer or visit www.rideicon.com for more information.
When sizing your helmet please refer to the size charts that are unique to each helmet shell:
Airframe Pro Helmet Sizing Chart
- Shell
- 2XS
- XS
- S
- M
- L
- XL
- 2XL
- 3XL
- Hat Size
- 2XS 6 3/8 - 6 1/2
- XS 6 5/8 - 6 3/4
- S 6 7/8 - 7
- M 7 1/8 - 7 1/4
- L 7 3/8 - 7 1/2
- XL 7 5/8 - 7 3/4
- 2XL 7 7/8 - 8
- 3XL 8 1/8 - 8 1/4
Variant Pro Helmet Sizing Chart
- Shell
- XS
- S
- M
- L
- XL
- 2XL
- 3XL
- Hat Size
- XS 6 5/8 - 6 3/4
- S 6 7/8 - 7
- M 7 1/8 - 7 1/4
- L 7 3/8 - 7 1/2
- XL 7 5/8 - 7 3/4
- 2XL 7 7/8 - 8
- 3XL 8 1/8 - 8 1/4
Airflite Helmet Sizing Chart
- Shell
- XS
- S
- M
- L
- XL
- 2XL
- 3XL
- Hat Size
- XS 6 5/8 - 6 3/4
- S 6 7/8 - 7
- M 7 1/8 - 7 1/4
- L 7 3/8 - 7 1/2
- XL 7 5/8 - 7 3/4
- 2XL 7 7/8 - 8
- 3XL 8 1/8 - 8 1/4
Airform Helmet Sizing Chart
- Shell
- XS
- S
- M
- L
- XL
- 2XL
- 3XL
- Hat Size
- XS 6 5/8 - 6 3/4
- S 6 7/8 - 7
- M 7 1/8 - 7 1/4
- L 7 3/8 - 7 1/2
- XL 7 5/8 - 7 3/4
- 2XL 7 7/8 - 8
- 3XL 8 1/8 - 8 1/4
Airmada Helmet Sizing Chart
- Shell
- 2XS
- XS
- S
- M
- L
- XL
- 2XL
- 3XL
- Hat Size
- 2XS 6 3/8 - 6 1/2
- XS 6 5/8 - 6 3/4
- S 6 7/8 - 7
- M 7 1/8 - 7 1/4
- L 7 3/8 - 7 1/2
- XL 7 5/8 - 7 3/4
- 2XL 7 7/8 - 8
- 3XL 8 1/8 - 8 1/4
Care Instructions
Let’s face it, Icon® helmets look cool and you want to keep them that
way. We’ve found the following methods work really well to keep our
helmets looking sharp and ready to roll. Remember, never use gas,
pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray
can lying around the garage. Chemicals and harsh solvents can break
down the materials in your helmet; it’s like using brake cleaner to
polish your plastics—don’t do it!
Interior Cleaning
1. Remove interior lining as shown on page 10 of the User
Manual. 2. Soak your interior in a mild solution of baby shampoo. 3.
Rinse in clean water several times until all soap is gone. 4. Let
interior air dry and replace accordingly. * Never machine wash or dry
your helmet interior.
Shield Cleaning
Your helmet is equipped with a scratch resistant fog free
shield. Common household cleaners such as glass cleaners, surface
cleaners, and furniture cleaners, can leave behind unwanted residues, or
in some extreme cases damage the shield itself. It is our
recommendation the same steps outlined above for cleaning the exterior
of your helmet should be applied to cleaning the exterior of your
shield. Use no cleaners or detergents on the inside of your shield.
Using anything other than a clean soft cloth, micro fiber cloth, or the
bag supplied with your helmet, will ruin or reduce the effectiveness of
the fog free coating.
Storage
It is a good idea to protect your helmet if it is stored for a
period of time. Store your helmet inside the helmet bag we have provided
in a secure, dry place out of direct exposure to sunlight.
Exterior Cleaning (Gloss Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the
helmet for at least 5 minutes to soften dried on bugs. (Don't skip this
step!) 2. Using a fresh, wet, clean cloth and mild dish soap wipe down
the exterior to get ride of road grime and softened bug guts. 3. Use
another fresh dry cloth towel to dry the helmet and get rid of any water
spots. * Never machine wash or dry your helmet interior.
Exterior Cleaning (Rubatone Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the
helmet for at least 5 minutes to soften dried on bugs. 2.Remove the now
softened bugs and road grime with a light blotting action. For this use
the soft part of your helmet bag provided or a clean microfiber cloth. *
Never rub aggressively with anything on the Rubatone™ or you can ruin
the finish.
Maintenance
1. For gloss helmet finishes, use spray automotive wax that
is specifically designed for cars with a clear coat. (Available at any
automotive store.) 2. For matte finishes, you know better than to polish
a matte finish don’t you?
Advisory
One Impact Rule - Any helmet that has sustained an impact should be
replaced. Helmets are designed to absorb only one impact. The helmet is
designed to absorb some shock by partial destruction of the shell and
liner. After your helmet has endured any impact, the impact absorption
liner portion of your helmet will have dispersed the energy from that
impact, thus rendering the liner compacted and, therefore, compromised.
This damage may not be visible. Even if there is no VISIBLE damage to
the shell, the helmet’s usefulness is expired after one impact. A helmet
that has experienced an impact should be destroyed and replaced, even
if it is apparently undamaged. Obsolesence and Helmet Disposal - A
helmet has a limited lifespan in use and should be replaced when it
shows obvious signs of wear, e.g. change of fit, cracks, rust, fraying
or other signs of normal “wear and tear” that can contribute to helmet
degradation.
Product Manual
Download Domain Manual 5 05 22
Exterior
A blending of neo-retro styling and future proof tech, the Domain is the next step in ICON design. The helmet’s ventilation system consists of a total of four intake vents, capable of flowing optimal amounts of cool air through the helmet and exiting through the large dorsal exhaust port. The sculpted neckline allows your head to slip on and off with ease while doubling as the access port for the integrated HelmLink™ Bluetooth® communicator. (sold separately)
Interior
The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure.
HelmLink
Bluetooth Communicator (Sold Separately)
The Domain features an all new approach to connectivity with fellow riders. ICON worked together with SENA Communications to develop a bluetooth communicator system that seamlessly replaces the side plates and rear neckroll of the Domain for a fully integrated system. Industry leading mesh technology and Bluetooth 5 capabilities allow you to connect with up to 20 riders. Housed inside the rear control unit lies an extra long battery life for those cross-country rides as well as an integrated rear-facing adaptive flashing light for heightened visibility.
